While we travel, our only companion is our commuting vehicles and motors cars. Hence, keeping them clean and bacteria-free is like saving our own lives. In this article, we’ll give you some tips to keep your commute free from hazardous viruses.

To keep your commutes safe and cleansed, one must be aware of the frequently touched points of your car. These frequently touched parts are likely to be contaminated with some viruses. Keeping them clean is our duty, so as to save our own lives and our family’s too. Yes, you can save your family’s life by just using a car sanitizer.

These cars, our near and dearly owned possessions. Right now, they are just ideally lying in your garages and parking areas. It’s time that they are taken care of, or they might incur your huge expenses later on. To fight this fatal disease of COVID-19, one must not be lenient on taking preventive measures. Now, let’s dive into the preventive measures of car sanitization.

Materials to be used for cleansing the interiors

The foremost step to be taken to disinfect your car is to choose the right materials for car coating. What material is to be used can be a tough question. But worry not, the material to be used depends on what sort of surface area you are cleaning like interior protection leather, plastic, cloth, leather upholstery, etc.

Use only approved car sanitizers to disinfect your car completely. Make sure you use a clean microfibre cloth to clean the surfaces with this disinfectant. The microfibre cloth is very useful in trapping dirt and leaves no scratches whatsoever. Use different disinfectants for seat leather, as using a wrong one can damage the leather. All the health advisories currently recommend you to stay at home and keep your car clean and disinfected. This is the minimum we can do to curb the spread of coronavirus.

You’ll be surprised because the small parts like ventilation grilles, knobs, and even the mirror play a vital role here.

Here, we have summed down a few of the points that need to be sanitized right now:

• Steering is one of the most obvious parts of the car that our hands-on. Every time you get into the car, the steering wheel is something that you are continuously in contact with. While sanitizing the steering wheel, make sure to clean the entire rim and not just the front side. The steering wheel’s center hub is way too close to your mouth when you cough or sneeze and might get contaminated easily. Furthermore, do not forget the headlight and wiper stalks on the side if at all you have them.
• Let’s move on to the next constantly touched point in your car, the door, and the door handles. Yes, they are the first part of the car that can come in contact with anyone’s touch. It is one of those places that can be easily infected with parasites or viruses. If the door pockets are used frequently by your family members, that too must be sanitized with some disinfectant.
• These switches may not be used so frequently but are always touched once or thrice when you drive the car. The car sanitizer liquid must be applied on these switch gears on the dashboard. These switches are frequently used to turn on or off the air conditioner or switch on the parking lights. This hard plastic material tends to carry the virus for a long time and cannot be missed at any cost.
• Do we forget something very important? Yes, the gear shift lever or also called a gear selector. This gear selector is constant changes and comes in direct contact with the driver’s hand. It can happen that you might sneeze while covering your mouth with your hand and use the same hand to change the gear. However, it is highly recommended that you don’t leave your house without a face mask.
• If you happen to carry a passenger with you, make sure they are seated in the back of the car. As much as the distance you keep, that much you’ll be protected from the virus. You might also require sanitizing the interiors of your car. However, it can be a tedious job to sanitize your car seats.

Here, Permagard can lend you a hand to cleanse your car and make it bacteria-free. Permagard uses its scientifically proven co-polymer coating. This coating will not only protect your interior against the viruses but also against any water-based spills and UV rays.

• Are you missing out on some spots? Think! Think harder! Yes, aren’t you using your car’s boot? The dickey has also been used by you to take home those groceries you bought the other day. This can be one of the most contaminated parts of the vehicles as the groceries directly goes in this trunk. Make sure you use your car sanitizer spray to get rid of all the germs in your boot.

After carrying out all the processes correctly, make sure to wash your hands before you enter your car. This will aid you in keeping your car clean. If at all you have had any patient that was COVID-19 in your car, it is recommended by the health advisory to clean the car immediately and seek medical assistance. It is highly essential to get yourself checked up as it is believed that the virus can stay in the air for up to three hours. Precaution is all that we can take at this point in time, at least until some full proof vaccine is developed.

All we want is that you and your family remain safe as we help you prevent the infection of the most deadly virus at this time.

The post Frequently Touched Points Of Your Car To Be Sanitized Amid Coronavirus appeared first on Permagard India.

It can lead to long-lasting stains and scratches on the surface of your car. It can also cause corrosion of the car’s exterior paint over some time. This makes the shine of your car dull. The paint may also chip off and can cause further damage.

Car owners are increasingly opting for protective products or films for protecting car paint. People are considering reactive polymer, car waxing, polishing, and paint protection films, vinyl wraps and ceramic or nano paints to protect the colour and gloss of their cars.

Car dealers are selling out a variety of car detailing products with lavish promises. This gives rise to a significant question. Which out of all these available products is best for your car?

We will discuss three main protection measures for car paint-

• Reactive polymer
• Car Wax
• Car films

Let us see if we can conclude the usage and vitality of any one of them.

Reactive Polymer

Reactive Polymer is a crystal-clear coating that chemically bonds to your vehicle’s paint to become a new surface. A reactive Polymer coating, which is very popular these days, is a clear coat that includes a liquid polymer. The polymer forms a chemical bond with the car’s factory paint. Once coated, it cannot be removed by any chemicals.

The polymer coating can protect the car from scratches, dirt, and contaminants. Polymer coating also doesn’t have any side-effects on the original paint. The resulting protective layer offers an ultra-smooth, high gloss, and resistant coating.

This coating acts as a shield between harmful contaminants and the paint. Since it combines the coating with paint by a strong chemical bond, the protection stays strong even under harsh circumstances.

Here are some points that support the notion of reactive polymer being the best car coating treatment. It can be applied to both new or old car, but it is recommended to apply to the newly bought cars.

Advantages

• These polymers are Super Hydrophobic in nature. Their water-repellant nature reduces cleaning time. It also extends times between needed washes.
• They are UV resistant and thus preserve the colour from fading and oxidation.
• Reactive Polymer extends paint life, as it covers the paint with a protective layer.
• It increases the curb appeal of your car and maintains a high gloss finish.
• If done correctly, the protective coating can last the lifetime of the car.

Car wax

Car waxes are solid hydrocarbons in the form of waxes. Most of the waxes are in solid form, so you cannot directly apply them to your car. Moreover, car wax can literally destroy expensive cars. If you own a luxury car, it would be better to skip the application of car wax. Instead, reactive polymer technology preserves the surface of luxury cars.

Disadvantages

• Wax melts at high temperature thus dust and dirt particles get easily stuck, damaging the paint.
• Wax builds up over time on the car’s surface layer by layer. Over time, scratches dull the exposed finish. 
• The length of protection is not more than 6 weeks.

Paint Protection Films or PPFs

Paint Protection Film or a PPF is a urethane film made from a thermoplastic compound. You can apply it to painted surfaces of a new or used car to protect the paint or can even be applied to the exterior portion of the car. Anywhere if you suspect the possibility of scratches or stains and abrasions, you can get the PPFs applied.

This increases the amount of time you spend on paint protection. Every time you forget to cover a portion of paint with a PPF film, it can get damaged. On the other hand, reactive polymer proposes a more convenient scheme. Paint protection films are a rather outdated method of paint protection.

Disadvantages

• Professional vehicle wraps come at a very expensive price.
• In addition, the films can start wearing after 2 to 3 years when subjected to strong sun, debris, and weather.
• The PPFs or the Vinyl wraps are good for cars with factory paint jobs. If you have repainted your car or it has a corroded surface, the vinyl wrap may not adhere well and will lead to wrinkling, or and bubbling.

Everybody wants to keep his or her cars shiny and glossy like the new. Considering all the pros and cons, the PFFs and car wax do not stand a chance against the latest reactive polymer technology. The polymer coating, when used, lasts longer than any wax.

It is more scratch-resistant and has superior UV protection. Even the strong rays of the Sun will not be able to oxidize the car paint under extreme conditions. Reactive Polymer coatings also have great hydrophobic strength, which is not present in the films or waxes.

To conclude, whatever be your requirements, you can always rely on Permagard. We lead the world in the technology of paint protection. Our Polymer Coating will prevent paint oxidation from the sun and other elements. Thus, it will go a long way in protecting your car from rust and general deterioration.

The Permagard treatment for your car uses an eco-friendly reactive polymer that is suitable for all types of vehicles. You can directly apply it to your car’s surface. It provides durable protection and maintains a long-lasting shine on any painted surface. These are some of the factors that reinforce the consideration of Reactive Polymer technology as the best car coating treatment.

The post What’s Best For A Car Coating: Reactive Polymer, Wax or Film? appeared first on Permagard India.

You can get your car repaired if any of its parts malfunction. But, your car’s exterior also requires a much-needed touch-up over time. And for that purpose, there is no need to consult anyone but Permagard. The car paint protection treatment provided by the automotive maintenance expert is something your car needs.

How does your car suffer paint damage?

● If your car remains parked for long hours under direct sunlight, the car paint may become weak over time and peel off.

● Sometimes, you may park your car in such areas where temperature fluctuations differ. Then the colour will tend to crack up because of high temperatures.

● External substances, including pollution fallouts, often causes stains that can damage the paint of your car. The copolymer technology works to repel such stains. 

● Gasoline and brake fluid also destroys the paint.

● Cars parked in or near construction sites suffer a lot of damage due to dirt and dust. Construction material damages a vehicle and can leave a permanent stain as well.

● Marks or scratches from blades, scissors, knives, or stones can damage car paint easily.

Why does your car need Paint Protection?

Every day, your car is exposed to external elements that can destroy your car. Do not wait for the paint to wear away. It is always a good option to be safe before then, sorry. Nobody can deny the benefits of car paint protection. Paint protection is the right way of keeping your car’s exterior in top condition. The patented technology of Permagard is the best option for protecting car paint. This is a transparent coating applied over the top of the car’s original paintwork.

Untreated paint scrubs on the car’s paint can be damaging to the exterior body of the car. A premium product like paint protection by Permagard is a viable option. It is a safe and convenient method to protect car paint. Keeping in mind these types of damages and strain that your car’s exterior goes through, car paint protection becomes a must. Let us discuss the different kinds of car paint protection available:

Types of Car paint protection

There are different kinds of car paint protection treatments. It can be in the form of waxes or sealants or the newer ways of glass and spray coatings. Older paint technologies used chemicals and polymers that were harmful to the people and the environment. They contained two harmful ingredients that were lead and solvents. Lead is very toxic to humans in any dosage. Injurious solvents like VOC are bad for the environment and specifically the Ozone layer. This has led to the progressive development of innovative water-based car protection paints. Reactive polymer technology safeguards your car with the help of a chemical bonded defence mechanism. It also eliminates the aspect of health hazards by using safer chemicals and an invisible guard. 

Polymer protection

This scientific technology works on the principle of directly repelling airborne pollutants. It does away with the risk of letting the dust settle on the car and then remove it. Any sort of contaminant is neutralized on the spot with the help of a glossy, protective barrier. The impact of heavy particles can be repaired using cosmetic sprays.

Advantages of using Polymer technology

• It eliminates pollutants before they settle on the car’s exterior.
• All the ingredients used are biodegradable and eco-friendly.
• It makes the process of maintenance much easier and faster.
• The neutralization of contaminants happens instantly.
• The chemicals used are completely safe for humans, unlike other technologies. 
• No extra work is required. Just getting your washed regularly does the job once the polymer coating is applied. 

Ceramic or Nano-coatings 

Another form of car paint protection is glass coatings. They are also known as Ceramic or Nano-coatings. They are silica-based solutions that create a protective glass coating on the surface of the car. This is an earlier method of paint protection, and customers do not prefer using ceramic coatings nowadays — the reason being the availability of such advanced technologies like that of Polymer Protection. 

Waxes and Sealants

You can use waxes for gloss on the car’s exterior surface. Sealants are a step ahead and are a more durable form of waxes. They provide an aesthetic look to your car’s exterior. However, the gloss and shine using this mechanism come at a cost. There is a considerable risk of the paint being damaged by the usage of waxes, especially if you own a luxury car. High-range cars need a more premium protection scheme like Permagard’s Polymer Technology.

Added benefits of using Polymer Protection

Damage to a car’s paint is a certain occurrence and will happen to your car, sooner or later. New car buyers often get anxious about even the slightest scratch on their dream vehicle. Car Dealers get keen to sell the latest paint protection covers to buyers who want to keep their new car looking spick and span. The benefits of car paint protection are manifold. The best option is to rely on the Reactive Polymer technology by Permagard for hassle-free maintenance of your car. Waiting for your car to get damaged to protect the paint is just a wastage of time. Our busy lives do not allow us to put in extra efforts for the protection of our car. Polymer technology does the job for you. 

You will always like to have your car shining and glossy as a new car that comes out of the showroom. If you want to keep the exterior of your car in good condition always, paint protection using Polymer technology is a good idea. Some more benefits your car will get are as follows:

● The polymer technology will shield your car from sunshine, acid rain, bird droppings, or other road stains.

● The car’s paint protection coating backed by polymer technology will protect it from weather erosions or toxic tumbling, and chemicals.

● A good layer helps to maintain the sleek and glossy appearance of your car.it will increase the durability of the paint. It also enhances the resale value of your car.

● You only need to apply the polymer coatings once as they are durable. So, you don’t need to worry about frequently polishing and waxing your car.

● This makes it easier to clean your car and reduces the possibility of any build-up of dust.

● The paint protection cover provides cost-effective car maintenance as it comes with a long or a lifetime warranty. The polymer technology also cuts down frequent cleaning and thus saves a reasonable time.

You are your best Judge.

The need for a protective coating for the paint of your car’s exteriors will thus depend upon the condition in which your car stays. It will also greatly depend on how you use your car. If you are in for a low-maintenance service, look for a hassle-free one-time investment. This will keep your car as new. In such cases, you can confidently opt for a scheme to protect car paint. 

You should be the best one to decide whether your car needs a paint protection cover or not. The best thing to do is to keep an account of the distance your car covers on a regular basis. This will clarify your doubt on whether you should go for paint protection or not. 

The Current Scenario in the Car Paint Protection Job

Every car manufacturer now uses water-based paints due to new laws banning older paint technologies. Older car paints that used lead and oil did provide a perfect glossy finish. Unfortunately, it is not possible to sustain that same gloss with ‘water’ based paints.

Also, there are UV absorbers in water-based paints. These break down quickly when exposed to strong sunlight for long hours. This makes them lose their protective functionality from the coating over time. India has a high level of damaging ultraviolet rays. This means our vehicle paintwork deteriorates quickly due to ultraviolet damage from the sun. This is the reason why we recommend using a proven paint protection technology such as Permagard, for every car in India.

Conclusion

We, at Permagard, are committed to providing the highest quality to our customers in everything that we undertake. Our eco-friendly products are designed tested and maintained according to the highest health and safety standards. They are justifiable, regarded as the best car paint treatments, by our customers. That is why we are proud to mention that Permagard is accredited with ISO14001 (Environment), OHSAS18001 (Health and Safety) and ISO9001 (Quality) certification.

The post Car Paint Protection – Is it Worthwhile or Pointless to have one? appeared first on Permagard India.

Car Leather Protection : Leather has been a special element of vehicle seats and vehicle upholstery for more than 100 years. Initially, vegetable tanning was the most prevalent amongst people to clean skins and cover of the car seats, which provided no surface coloration; also, oils and lubricants were used to avoid water penetration. 

But later, leather came into the trend and was replaced by the vegetable tannings as the leather hold off humidity avoids getting seats messy and shabby, and it was impregnated with chrome tanning to die. One of the main reasons this was rapidly preferred over vegetable tanning is its faster application.

Leather car seats are a significant choice for a vehicle’s interior and often come at a high cost. In light of the additional cost of a leather interior and the requirement for solace, while driving, the crucial step is to clean the Leather. You have to ensure, and re-establish the firmness of the Leather.

Nevertheless, your leather seats and steering wheel are susceptible to a lot of friction. Continuous sun exposure can turn the Leather to become dry and faint. Also, with the passage of time, the weight and friction while sitting can make the leather seat split, and creases start to appear. People are still unaware of how to take care of your car seats leather to add its longevity. This article will undoubtedly clear your all doubts and help them in understanding why you need to take care of your car seat leather.

Why does your car need leather protection?

Leather seats are like the cherry over an extravagant car sundae. However, without legitimate care, they can turn gross. Leather is more of a natural material and is liable to tearing, cracking, and fading due to warmth and UV rays. Therefore, carrying out regular routine care and maintenance will increase the life of the leather. It will turn out your car looks as if bought new from the showroom, giving it a glossier effect!

Car manufacturers perform different tests on leather. These include testing the tear quality of leather, vapor porousness, squeaks, clatters, combustibility, ruining, and smell. The smell test is most likely the only one not requiring a machine. Because of the thorough testing forms, vehicle leathers are exceptionally uniform in appearance, quite often single-shaded, smooth leather. These standard leathers are utilized with various mixes.

You can generally endeavor to fix or reduce your scratched car’s leather after you have already destroyed it. Nonetheless, this is not constantly effective, but preventive action is constantly a superior choice. On the off chance if it is all about a damaged car’s leather, you can counsel our Permagard experts to have it analyzed to limit harm and reestablish it to its unique greatness.Permagard provides the best car leather protection in India.

Why do Leather Seats Get Damage?

Leather Treatment

• Leather treatment to ensure the preservation of the seat

Another approach to help to avoid long-lasting scratch harm to your car’s leather is with Leather treatment. Permagard’s superior leather treatment will protect all interior leather allowing it to breathe by providing outstanding long term protection.

The leather treatment helps in preserving, encapsulating while providing it a protective layer, and not only maintains your leather’s look but also smells pleasant.

The leather treatment protects leather against UV rays and the cracking and fading of the leather that is caused by the UV exposures that allow leather turns out to be feeble, crack with time, Fainted and dull appearance and becomes excessively dry. The leather treatment remedy prolongs the life of the leather.

• Providing Repulsion To The Seats

Permagard’s superior leather treatment protects your car seats, repelling it from various spillages that we often mistakenly stumble the water and beverage like tea, coffee, etc. Inside the car, It doesn’t let seats absorb the dampness or moisture content by protecting it from growing and inhabiting various germs and bacteria.

It also provides repulsion from dust particles, reduces wear and dirt build-up to prevent the accumulation of excessive dirt, thus, resulting in a reduction in friction of embedded contaminates on your leather.

• Protection from Scratches and Other Damages

Everybody cherishes and wishes that their car looked perfect and top class, every time. This can surely be achieved by taking its care not only exteriorly but interiorly too, and the interiors cover more significant part of your car leather seats, various methods will help in your leather persistency by simply not keeping your car outside for too long in the bright and scorching sunlight during summers and protecting it by parking it in a shed, Garage or by just covering it with the car cover completely.

• Cleaning Leather Seats

Car leathers are not that difficult to clean and take care of; in fact, it is one of the most natural forms. If your car leather seat is filthy. Wipe your leather seated car down with microfiber or dry and absorbent cloth regularly instead of damp cloth only, keeping a seat damp for too long can be a great way to invite bacteria and germs.

• Conclusion

Ultimately, to ensure the lifelong health of your car leather, it is essential to keep good care of it. Of course, leather seats require a lot of attention and maintenance. Permagard assists you in this regard. It is important to keep several things in mind when you think of dealing with your car’s leather, also by avoiding various things. Obviously, why will anyone let the glory of his or her car diminish? It is crucial to keep a vital check over your car’s leather to keep it just like the way it looked the first day.

The longevity of a car’s leather always depends upon the care and maintenance taken by the owner. And, if you follow the above guidelines correctly, it will surely increase the long life span of your car’s leather.

The post Car Leather Protection  – Add Longevity to Your Car’s Leather appeared first on Permagard India.

The paint and gel surfaces treated with Permagard technology are highly durable and corrosion-free. We are committed to maintaining our standards in order to deliver high-quality products, service & experience to our customers. We guarantee the best solution to our customers for the long-term protection of their vehicles. Permagard provides interior & exterior protection for automobiles, marine vessels, and aircraft.

Our international brand values the beauty, performance, and luxury of your vehicles. We provide high-quality paint protection for your vehicles, which involves advanced reactive polymer technology. We at Permagard, ensure continuous experimentation and improvement with our products to provide the best quality products to you.

What Is Reactive Polymer Technology?

Reactive polymer technology is a revolutionary technology that has been a part of Permagard for decades now. However, acknowledgment about this product is quite unheard in India as people are still not familiar with such technology and seem to be still using older methods or products when it comes to protecting their priced possessions.

Permagard aims to provide the best to its customers for all vehicles such as aircraft, yachts, and cars. We have aviation coating of excellent grade and the most advanced technology in the world. This is in order to produce the best so that we can satisfy each and every customer. Our materials are tested in some of the most trustworthy and well-equipped labs in the world. In addition to the above-mentioned factors, it is an economical choice that enhances the value of the products.

The high performance, environmentally safe protective coatings have been engineered to enhance and maintain a new-like appearance. Permagard gives you the feel of a new vehicle even if it has been a while. Further, it has been trusted to protect painted surfaces that are some of the most expensive machines in the world. It features a patented coating which is the most advanced corrosion protection technology available today, protects the vehicles from various adverse effects, climates & pollutants.

How Does Reactive Polymer Technology Work?

Permagard’s “Reactive” polymer coating is applied by an oscillating (buff like) machine to the painted surface filling in the pores (valleys) of the paint creating a flat and uniform surface.

Its plasticized coating called ‘Reactive’ polymer because of the locking reaction that takes place at a molecular level deep inside the porous paint surface, bonding and locking the coating to the paint. The coating then begins to cure initiating a covalent reaction (bonding and tightening of the plastic molecules) in effect “laminating” the Permagard coating to the painted surface. This process occurs at a molecular level, locking the plastic molecules tightly over the painted surface completely encapsulating the paint with a plasticized protective barrier.

Once the coating has cured completely, it will harden, further helping to resist environmental damage such as bird droppings, abrasive chemicals and paint pollutants that attack a painted surface if not protected. For added protection, Permagard coatings are infused with the state of the art UV inhibitors which act like sun cream in deflecting the harmful UV rays away from the paint and back into the atmosphere. The UV inhibitors are locked into position within the durable polymer matrix.

Permagard uses environment-friendly components that are safe to use and can prevent rust and stain on your vehicles during all possible times. The technology proves to be very efficient and once the surface is treated it becomes very easy to clean. All it requires is a damp cloth to clean the surface and maintain the finish.

Benefits Of Reactive Polymer Coatings

Polymers constitute almost everything in today’s world and it is a combination of the simplest to the most complex of the substances. Permagard high-performance environmentally safe protective coatings have been engineered to enhance and maintain a like-new appearance for the lifetime of the paint and it provides a stabilizing, gloss-producing curing process and corrosion protection and hydrophobic efficiency. These substances have improved and helped many products to upgrade their performances. In this section, we are going to discuss some of the benefits of using the CoPolymer coating of Permagard over products made with other materials.

It is cost-effective

Reactive Polymer coating proves to be durable and it can last for a very long period of time, which reduces the time invested in maintenance and also the requirement of repaint from time to time.

It is more resistant

Permagard’s coating made with reactive polymers is resistant to chemicals and is less prone to corrosion and erosion. This has been designed to withstand even the harshest of chemical and environmental attacks thereby forming a protective layer over the surface coating of your vehicles and maintaining the gloss and shine of the products even at extreme temperatures.

This factor enables the reactive polymer coating to maintain its shape for long without turning into a pool of liquid over time. This coating by Permagard is known to be sturdy and it comes in use for a long period of time without having to face any additional problems concerning external atmospheric and physical features. This is undoubtedly the best car paint protection coating.

It does not require any finishing efforts after treatment

Reactive Polymer composites have a natural corrosion resistant technology that does not require any special galvanization to protect it from corrosion and erosion. This happens before the process of machining in order to eliminate any requirement of post-treatment after the appearance of the final product.

It is lightweight and corrosion-resistant

The reactive polymer coating of Permagard is quite light than most of the metals and this factor proves to be the major requirement of several industries. The Reactive Polymer coating is corrosion-resistant, which means that it can withstand extreme chemical torchers and can still shine as bright as new. This practice increases the lifespan of the vehicles and also avoids the heavy cost of maintenance. It is also resistant to smoke and flame.

Overall, it can be said that Permagard reactive polymer coating is quite easy to use and very versatile. It gains its marketing in a lot of industries and has proved to the best in the automotive sector, by supplying top quality materials for all sorts of products to all different types of industries. The Reactive Polymer coating is recyclable, which makes it quite useful and favorable. These benefits translate into significant savings for the operator. When it comes to protective barriers, there is no more sophisticated, scientifically sound choice than PERMAGARD.

All these factors make Permagard’s Reactive Polymer technology the best car paint protection coating.

The post Permagard – Reactive Polymer Technology – Advance Paint Coating appeared first on Permagard India.